LED-baglygter med sekventiel lysfunktion til BMW X5 F15 (2014–2018): Opgradering af belysningen til SUV’en

Bagfra-billede af en hvid BMW-SUV på en bjergvej ved solnedgang, med tændte baglygter og bjergkæder i det fjerne.

LED-baglygter med sekventiel lysfunktion til BMW X5 F15 (2014–2018): Opgradering af belysningen til SUV’en

The F15-generation X5 is a big, imposing SUV, and its rear end is one of the first things other drivers see. Upgrading to sequential LED tail lights gives the X5 a sharper, more premium light signature — full LED functions and a flowing dynamic indicator — that makes the 2014–2018 model look thoroughly current.

These LED tail lights for the BMW X5 F15 are built by Xunder and designed as a plug-and-play replacement that fits the original mounting positions. Here’s what they offer.

Fitment: BMW X5 F15, 2014–2018

The set is engineered specifically for the F15-chassis X5:

ChassisModelYears
F15BMW X52014–2018

If your X5 is on the F15 chassis from 2014–2018, these lights are designed to be a direct fit.

Premium LED Functions with a Sequential Sweep

Every function on these lamps runs on LEDs, giving a brighter, sharper, and more uniform light than the factory bulbs:

  • LED daytime running lights (DRL)
  • LED brake lights
  • LED reverse lights
  • Dynamic sequential turn signal with a fluid sweeping motion

The sequential indicator is the standout feature — it sweeps across the lens in a flowing animation rather than blinking as a single unit, the effect that most clearly signals a modern, upgraded car. Finished with a Elegant sort lens, the set gives the X5’s rear a darker, more purposeful look.

Output and Build Quality

The lights deliver 3400 lumens at 35W12V, providing strong, even output across all functions.

SpecificationDetail
BrandXunder
Output3400 LM
Power draw35 W
Spænding12 V
Turn signalDynamic sequential (fluid sweep)
HousingABS + PC + PMMA + Glass
Lens colourElegant sort
Waterproof ratingIP67 (fully sealed)
CertificationsCE, DOT, E-MARK, ECE
Warranty24 months
Package1 pair (driver + passenger)

The housing combines ABS, PC, PMMA and glass, and the assemblies are IP67 rated and fully sealed — dust-proof and corrosion-resistant, which is exactly what you want on an SUV that sees all weather and rough conditions. Certification covers CE, DOT, E-MARK and ECE, and the set is backed by a 24-month warranty.

Plug and Play — Original Mounting Positions

These lights fit the original mounting positions and require no splicing. They connect in place of the factory lamps without any cutting into the wiring loom, and arrive as a complete pair — driver and passenger side.

Because the X5’s lighting is monitored by the car’s electronics and it’s a full LED sequential assembly, professional installation is recommended. A specialist will confirm every function registers correctly without a dashboard fault, and ensure the units are correctly seated and sealed against the elements.

Why the X5 F15 Suits This Upgrade

  • Presence — the large rear surfaces of the X5 make a sequential black-lens set particularly striking.
  • Weather sealing — IP67, fully sealed, dust-proof and corrosion-resistant, ideal for an SUV used year-round.
  • Brightness and longevity — 3400 LM of instant-on LED output that outlasts filament bulbs.
  • Clean fit — original mounting positions and no splicing keep the installation tidy.

Comparing Across the BMW Range

If you’re coordinating the look with another BMW in the household, SpeedXperts stocks a matching sequential range. Coupe owners can look at the LED Tail Lights for BMW 4-Series F32/F33/F36/M4, while current 3-Series owners can consider the LED GTS Tail Lights for BMW 3-Series G20/G80 M3. All share the same sequential-signal design language.

What to Check Before You Order

A short checklist before purchase keeps the fit straightforward:

  • Confirm the chassis and year. This set fits the F15-chassis X5 from 2014–2018. The X5 was also sold in earlier (E70) and later (G05) generations that use completely different lights, so verify your chassis code on the VIN or registration document.
  • Factory light type. Trim levels and markets varied the rear-light hardware on the F15; a specialist can confirm compatibility with your exact car before you order.
  • Coding may be required. As with all modern BMWs, the X5 monitors its lighting, so coding is sometimes needed for the sequential function to run without a fault. A professional installer handles this.

Installation Overview

The set is a plug-and-play pair, so the mechanical work is direct: the boot and side trims are released to reach the lamp fixings, the factory units are unbolted and unplugged, and the new lamps are connected to the original harness before being bolted back into the same mounting positions. No drilling, cutting, or splicing is involved. Professional installation is recommended because the X5’s electronics need to recognise the new lamps — the installer confirms the brake, DRL, reverse and sequential functions all register, codes the car if the lighting monitor flags anything, and ensures each unit is correctly seated and sealed so the IP67 rating is preserved against weather and road grime.

Why the Upgrade Makes Sense on a Large SUV

The X5 spends most of its life outdoors and often covers big distances, which makes both the appearance and the sealing of its tail lights matter. The sequential black-lens set modernises the rear graphic of the F15 — a car that can otherwise look its age at the back — while the fully sealed ABS/PC/PMMA/glass housings resist the fogging and moisture ingress that eventually spoil tired factory lamps. The instant-on LED brake and indicator functions also improve how quickly following drivers register the vehicle, which is a genuine safety benefit on a large, heavy SUV. For owners planning to keep their F15 for years, it’s a durable, high-impact upgrade that refreshes the car without touching bodywork.

Ofte stillede spørgsmål

Which X5 does this fit?

The BMW X5 on the F15 chassis, from 2014 to 2018.

Do I need to splice any wiring?

No. They fit the original mounting positions with no splicing required. Professional installation is still recommended.

Are they sealed for all-weather SUV use?

Yes. They’re rated IP67 and fully sealed — dust-proof and corrosion-resistant.

What’s in the package?

One pair — the driver-side and passenger-side units — so both factory lights are replaced.

Are they road legal?

They carry CE, DOT, E-MARK and ECE certifications and come with a 24-month warranty.

Where to Buy the BMW X5 F15 LED Tail Lights

Den LED Tail Lights for BMW X5 F15 (2014–2018) are available at SpeedXperts for €594,90, supplied as a complete pair with a 24-month warranty.

For matching options, compare the 4-Series F32/M4 tail lights og den G20/G80 M3 GTS tail lights, or browse the full SpeedXperts shop for more lighting upgrades.

Skriv et svar

Din e-mailadresse vil ikke blive publiceret. Krævede felter er markeret med *

Kommentar

Indkøbskurv

Din indkøbskurv er tom

Du kan se alle de tilgængelige produkter og købe nogle af dem i butikken

Tilbage til butikken